Loading...
  • Platform Beam
  • Climbing Bracket
  • Tensile Bolt
  • Safe pin
  • Suspended Platform
  • Sector Plate
  • Position Disk
  • Walling to Bracket
  • Pull Push Prop
  • Connecting Shoe
  • Pin
  • Minitrim Set
Title1

1. Fix anchor system on the plywood by position bolt.

2. After the concrete pouring finished, take out the position bolt and remove the formwork.

3. Fix the tensil bolt into the V-climbing cone.

4. Lift the climbing bracket and hang it on the tensile bolt, then insert the safe pin. Make sure the bracket and tensile bolt are fixed firmly

5. After the next lift, tensile bolt and V-climbing cone can be taken out for reusing. Then fill the holes left by V-climbing cone.

Title2
 

Weight (kg)

Item No.

Tensile bolt M36/L=80

1.22

99000190

V-climbing cone M36/D20

1.77

99001203

High-strength rod D20/L=300

0.81

99000241

Anchor plate D20

0.65 99000102

 

Title3
  Weight (kg)

Item No.

Climbing bracket    
DXB-180 154.29 01220100
DXB-240 198.72 01230100
Vertical walling H-3285 97.49 01220200
Mini trim set    
DXB-180 18.86 01220300
DXB-240 20.60 01230300
Pin for vertical walling    
?25/L=250 0.92 01220400
Connecting shoe 6.17 01220500
     
Pull-push prop    
Adjustable range: 1900-2700 35.04 01220600

 

Title4
  Weight (kg) Item No.
Upright of suspended platform H=2160 22.84 01220800
Platform upright H-1600 6.72 01220900
Safe pin ?25 1.1 01221300
Walling-to-bracket holder    
1. Part1 0.92 99000234
2. Washer plate 60x140 0.60 99000075
3. Wingnut D15 0.40 99005052
Position bolt M36/L=50 0.80 99000112

 

Title5
  Weight (kg)

Item No.

Platform beam 12.62 01221000
Cast adjusting spindle 3.53 99000235
Sector Plate 2.17 01221100
Position Disk M36/L=40 0.38 99000402
Wall-attached support 2.5 01221200
Spring cotter ?4 0.023 99000502

 

免费a级毛片_成 人影片 免费观看网站_骚虎